CALL 0121 553 5461
Tooling / Spares
highlights
Ring Fence

 
 
Bandsaw Guide

 
 
TCT Saw Blades

  
 
Rubber / Steel
Feed Rollers

 
 
Mortise Chisels
& Bits

 
 
DC Injection Braking for the Woodworking Industry
 
 

Mpower RS-420
Radial Arm Saw

Mpower RS-420

CE

Features and Construction
  • Rail surface is nitriding hardened, friction and wear is reduced to the minimum. Precision ground for smooth and accurate slide of sawhead.

  • Replaceable rail allows ease of maintenance.

  • Sawhead runs on 8 ball bearings, providing effortless moving and comfortable operation.

  • Rigidly constructed arm is one-piece casted, assuring deformation free after years of operation.

  • Sawblade is driven with a high performance 4hp motor, compact and very light in weight.

  • Arm swivells 45 degrees right and left.

  • Sawblade may be set at any angle, and locked securely at the desired setting.

  • Fully guarded sawblade gives maximum safety for the operator.

  • Anti-Kickback pawls provides positive work holding and added safety.
Detail Detail
Specifications
RS-420
Motor
4hp
Motor speed
2875rpm(50Hz)
3450rpm(60Hz)
Bearings for rails
8pcs
Spindle diameter
1"(25.4mm)
Blade diameter
14"(355mm) or
12"(305mm)
Head swiveling
0 - 180 degrees
Head tilting
0 - 90 degrees
Max. trimming width
W=860mm
Max. cross cutting length
L=680mm
90 degree Cross cut capacity
at H = 20mm
L=640mm
at H = 110mm
L=550mm
45 degree Cross cut capacity
at H = 20mm
L=453mm
at H = 110mm
L=389mm
Table area L x W
1120mmx860mm
Packing/Weight table
Overall Measurment (cm)
116 x 112 x 142
Packing dimension (cm)
117 x 91 x 43
Net weight
197kg
Gross weight
247kg

Back to Crosscut Saws
Back to Mpower machines

  Since 1954 Conway Saw and Supply UK have been supplying new and used woodworking machinery and associated equipment to the solid wood and panel processing industries. Centrally located in West Bromwich, UK, visitors are welcome to visit our purpose built factory with over 200 examples of new and used woodworking machinery.

  All our new and used woodworking machinery is supplied with a comprehensive warranty backed up by our own service engineers in addition to any manufacturers guarantee. Our comprehensive UK stock ranges from semi-professional universal woodworkers through to high production computer controlled routing and sawing machines and it is our aim to provide a solution whatever your machinery requirements. Important changes to the safety regulations which apply to all types of new and used woodworking machinery are now in place.

  Our 10,000 sq ft purpose built factory at West Bromwich is approximately 30 minutes from Birmingham International Airport and 2 miles from motorway network. Our modern factory is equipped with the latest handling equipment for new and used woodworking machinery.