|
| Tooling
/ Spares
highlights | Ring
Fence | | | | | Bandsaw
Guide | | | | | TCT
Saw Blades | | | | | Rubber
/ Steel
Feed Rollers | |
| | | Mortise
Chisels
& Bits | |
| | | DC
Injection Braking for the Woodworking Industry |
| |
|
Tecnoma NT5
Automatic
Edgebanders
Solutions and Technology for
the woodworking industry |
Controlled by an electronic microprocessor
Compact, versatile, reliable &
accurate
Tecnoma KMAC NT5.4 RRS
 | Simplicity
and technology. Tecnoma edgebanders offer an excellent price-performance ratio,
combining the reliability of modern technology with a compact design and value
for money. | TECNOMA specialises in the production
of automatic edgebanders; the technical features, technology and working unit
sequences are specifically designed to meet the requirements of the woodworking
industry. All TECNOMA edgebanders undergo stringent tests at the various stages
of production and are carefully inspected to check the quality of all edgebanding
applications.
The automatic edgebander NT5 is a versatile machine for
precision applications of edge banding material in strips and coils. |
Some edging examples
| | Edging coils Melamine,Veneer, thin
PVC, PVC/ABS up to 3 mm thickness. | Edging strips
Laminate,
Formica, solid wood up to 5mm thickness. |
- Manufactured in series with high quality materials -
|
| | |
| THK prismatic guideways
for precision and agility, 2 motors with 0-15degree tilt adjustment, 12,000 rpm.
Adjustable copying devices. |  |
| Dust protection
for pneumatic components. | |
End-trimming unit |
| |
Top and
bottom edge-trimming unit
| Slides on rounded guideways
made of ground and hardened steel, with recirculating ball bushings for maximum
precision. |  |
| Complete with horizontal
and vertical copying devices. |
Scraping unit
| For rounded finishing
of edges in PVC/ABS with a thickness of 2-3 mm. Cast iron structure to eliminate
vibrations. |  |
| Quick disconnection from
the work line. Complete with adjustable horizontal and vertical copying devices. |
Buffing
unit | For
edge buffing and polishing, 2 adjustable motors, 12 layers of cotton A10. |  |
| 
 |
Modern Technology NT5 Motorised,
fully pneumatic: no adjustments required for edge thickness change. | | Roller
for glue application.
Pre-heating system of glue.
Automatic lowering of
glue temperature when the machine is temporarily not in use.
Automatic feeding
of edging in coils and manual feeding of edging in strips.
Two edge pressure
rollers: the first is power driven with a clutch system. Shearing device for edging
in coils with a maximum thickness of 3mm standard. | |
|
Positioner edge unit Edge
feeder Gluing unit | | |
| |
Glue scraper | |
| |
| To finish plastic edges - a pair of
reversible and throw away knife tips. Vertical rotating copying shoes. Air blowing
systems for the tools cleaning. Complete with pneumatic exclusion. |
|  |
| | |
- Modern Technology -
| | THK
prismatic guideways on end trimming unit, with pre-loaded recirculating ball sliding
blocks and double dust protection: for high precision cutting. |
| |
| Electronic
digital thermo regulator with built-in timer: to prevent glue burning. |
| |
| Static
frequency converter, from 50 Hz to 200 Hz, electronic: for quality cutting finish. |
| |
| Cutters
with reversible and inter-changeable carbide knives: for a safe and lasting cut
avoiding sharpening. |
|
| | Replaceable
graphite nylon feed chain pads: for smooth panel sliding. |
| | | Panel
pressure beam with ground rubber wheels: for constant pressure on the panel for
the entire length of the machine. |
| | | Glue
pot with anti-stick internal coating: for easy glue pot cleaning. |
|
- Complete range of standard
equipment -
- 2 adjustable air blowing systems to cool delicate
edging.
- Protection/copying plate in front of the glue roller blocking.
- Safety
device in case of a drop in pneumatic pressure.
- Centralised dust
extraction.
- EC safety regulations.
| - Upon request -
| |
Programmable logic control with PLC with operator interface
with monitor
"touch screen" - Eliminates relay and microswitches.
- Allows
customised working programs to be carried out without errors and in a simple and
fast way.
- Manages the pneumatic on/off of the working units.
- Operating
units control and automatic start of motors.
- Control of the signal light
that informs when the panel can be fed.
- Guided diagnostics to resolve
possible errors.
- Working statistical data.
- Maintenance messages.
|
| |
| | |
Quick pneumatic tilting of end-trimming units from the control
panel.
| |
| |
| | |
Quick pneumatic release of working units from the control
panel. 
| | |
| |
| | |
|
|
| - Robust - |
| | |  |
| Panel
feed system using 1-inch strong industrial chain. Large sized transport tracking,
with an industrial feed pad: 70 mm wide. | | Tubular
structures with extremely good bending and torsional strength for: basement, table
for working units and feed chain housing. | | | | |
- Stability of
panels during processing - To ensure maximum stability
of panels during processing, especially small panels:-
|
| | Two
rows of staggered pressure wheels. |
| | | Rubber
pressure wheels with large diameter (60 mm) mounted on bearing to accommodate
any small differences in the thickness of panels. |
| | | Two
rounded guides for the feed chain pads to ensure a perfect and lasting resistance
to side loads. |
- Ease
of maintenance -
- Compressed
air filtering and lubrification unit.
- Centralised
pneumatic air cleaning of the feed chain.
-
Possibility of fitting compressed air gun to clean the machine.
-
End-trimmer unit shavings removal conveyor.
| - Practical and
fast setup - | |
| Quick
release of working units for speedy replacement of cutters and fast work changing. |
| |
| With
radius cutters: 2 manually adjustable work positions, for quick changeover from
thin edge to edge with a thickness of 2-3 mm. |
| | | Digital
indicators on the main adjustments: panel thickness, edge thickness, top and bottom
edge trimmers, edge scrapers. |
|
| | Large
infeed guide, to ensure safe loading of panels of all sizes. |
| | |
Quick selections switch for pneumatic pressure of the shearing device: thin
edge - 2-3 mm thick edge. Adjustments and controls on independent devices. |
|
| |
|
Adjustable rollers support for large panels, running the entire length of the
machine. |
TECNOMA offers a wide range of models to satisfy all
requirements
|
|
Technical Data NT5 |
| Working height | 8
- 45mm | | Thickness of edging in rolls |
0.4 - 3mm | | Max. thickness
of edging in strips | 5mm |
| Minimum panel width | 60mm |
| Minimum panel length | 150/200mm |
| Panel feed speed | 13m/min |
| Exhaust hood diameter | 2
x 50mm | | End-cutting unit motor power |
0.35Kw | | End-cutting unit
rotation speed | 12,000rpm |
| Edge-trimming unit motor power | 0.50
+ 0.35 Kw | | Edge-trimming rotation speed |
12,000rpm | | Buffing unit
motors power | 0.13Kw |
| Buffing unit rotation speed | 2,750rpm |
| Dimensions |
| | A
mm |
B
mm | C
mm | Height
mm |
Power rating
Kw | Net
Weight
Kg | | NT5.2R |
3500 | 1200 |
400 | 1370 |
6.5 | 680 |
| NT5.3RS | 3500 |
1200 | 400 |
1370 | 6.8 |
730 | | NT5.3RC |
3500 | 1200 |
400 | 1370 |
6.5 | 700 |
| NT5.3RR | 3500 |
1200 | 400 |
1370 | 6.5 |
720 | | NT5.4RRS |
3500 | 1200 |
400 | 1370 |
6.8 | 770 |
| NT5.4RRC | 3500 |
1200 | 400 |
1370 | 6.5 |
750 | | |
| Model |
ISO/DIS 7960(F)
Operator position - machine working
| | Work piece infeed |
Work piece outfeed | | NT5 |
80.5dB(A)
| 79.4dB(A) |
| |
