|
| Tooling
/ Spares
highlights | Ring
Fence | | | | | Bandsaw
Guide | | | | | TCT
Saw Blades | | | | | Rubber
/ Steel
Feed Rollers | |
| | | Mortise
Chisels
& Bits | |
| | | DC
Injection Braking for the Woodworking Industry |
| |
|
Tecnoma XT10 - XT15
Automatic Edgebanders
Solutions and Technology
for the small industry |
Modern and user-friendly
Tecnoma XT10.5 
 | Simplicity
and technology. Tecnoma edgebanders offer an excellent price-performance ratio,
combining the reliability of modern technology with a compact design and value
for money. | TECNOMA specialises in the production
of automatic edgebanders; the technical features, technology and working unit
sequences are specifically designed to meet the requirements of small industry.
All TECNOMA edgebanders undergo stringent tests at the various stages of production
and are carefully inspected to check the quality of all edgebanding applications.
|
The automatic edgebanders XT10
and XT15 are versatile machines for precision applications of edge banding material
in strips and coils.
Edging coils
Melamine,Veneer,
thin PVC, PVC/ABS up to 3 mm thickness. | | Edging
strips
Laminate, Formica, solid wood up to (XT10) 10mm thickness, (XT15)
15mm thickness. | | |
Some edging examples | |
|
| | |
-
UPON REQUEST -
|
|
Programmable
logic control with PLC with operator interface with monitor
"touch screen" -
Eliminates relay and microswitches.
- Allows
customised working programs to be carried out without errors and in a simple and
fast way.
- Manages the pneumatic on/off of the
working units.
- Operating units control and
automatic start of motors.
- Control of the signal
light that informs when the panel can be fed.
- Guided diagnostics to resolve possible errors.
-
Working statistical data.
- Maintenance messages. |
| |
|
Quick pneumatic release of working units
from the control panel.
|
|
| | Quick
pneumatic tilting of end-trimming units from the control panel. |  |
| | |
- Manufactured in series with high quality materials
- |
| | | |
-
For edge buffing and polishing.
- 2 adjustable motors.
- 12 layers of
cotton A10.
| 
- THK prismatic guideways for precision and agility.
- 2 motors with 0-15degree
tilt adjustment.
- 12,000rpm.
- Adjustable copying devices.
- Dust
protection for pneumatic components.
| |
- Roller for glue application.
- Pre-heating
system of glue.
- Automatic lowering of glue temperature when the machine
is temporarily not in use.
- Automatic feeding of edging in coils and manual
feeding of edging in strips.
- 3 edge pressure rollers: the first is power
driven with a clutch system.
- Shearing device for edging in coils with a
maximum thickness of 3mm (on request for models without the scraper unit).
  |
| Buffing
unit |
End-trimming
unit | | Edge
feeder/Gluing unit | 
| | Scraping
unit | Top
and bottom edge-trimming unit | | |
- For rounded finishing of edges in PVC/ABS with a thickness of 2-3mm.
- Cast
iron structure to eliminate vibrations.
- Quick disconnection from the work
line.
- Complete with adjustable horizontal and vertical copying devices
| - Slides on rounded guideways
made of ground and hardened steel, with recirculating ball bushings for maximum
precision.
- Complete with horizontal and vertical copying devices. |  |
| | | | |
- Modern Technology
-
| | THK
prismatic guideways on end trimming unit, with pre-loaded recirculating ball sliding
blocks and double dust protection: for high precision cutting. |
| |
| Electronic
digital thermo regulator with built-in timer: to prevent glue burning. |
| |
| Static
frequency converter, from 50 Hz to 200 Hz, electronic: for quality cutting finish. |
|
XT10 
XT15 | Cutters with reversible
and inter-changeable carbide knives:
- for a safe and lasting cut avoiding
sharpening. |
| |
| Replaceable
graphite nylon feed chain pads: for smooth panel sliding. |
| | | Panel
pressure beam with ground rubber wheels: for constant pressure on the panel for
the entire length of the machine. |
| | | Glue
pot with anti-stick internal coating: for easy glue pot cleaning. |
Tecnoma XT15
Robust machine for
application of edge banding on solid wood, with high-quality finish and easy setup
XT15
 |
Top and bottom edge-trimming unit
- Robust structure, for smooth, vibration free machining of thick edges.
-
Two motors with 0 - 15degree tilt adjustment, 12,000rpm.
- Vertical and horizontal
copying disks, adjustable.
- Slides on rounded guideways made of ground and
hardened steel, with recirculating ball bushings for maximum precision
| |
The XT10 and XT15 incorporate a number
of quality and
practical solutions
| |
| Reliable automatic feeding of all
edge types and thicknesses.
In coils:-
Both:
maximum thickness 3mm
In strips:-
XT10: maximum thickness 10mm
XT15: maximum thickness 15mm |
| |
|
Edge feeding by pin roller or rubber roller for thin edges, with adjustable mechanical
thrust. |
|
|
- Quick and
easy edge changing - | |
|  |
- Single-handed height adustment of edge guide.
- Counter-presser
with adjustable pneumatic pressure.
- Shearing device with quick
mechanical and electrical release.
- Quick selection switch for
the pneumatic pressure of the shearing device: thin / thick edge.
- Shearing
unit with horizontal knife movement: for maximum cutting efficiency.
|
| | |
| | | |
| - Reliability of
edge gluing -
| | Robust
edge pressure rollers are essential for the correct application of thick strips
of wood. | 
Unit with 3 edge pressure rollers and edge thickness shown clearly on decimal
digital display. | The
first roller features: - Independent adjustable pneumatic pressure:
to obtain the correct pressure for each edge type and thickness. - Large
diameter (160mm):
for fast edge cooling. - Motorised and with
adjustable clutch unit on "Ferodo" disks:
to eliminate edge
slippage. - 360degree adjustability around its axis:
to ensure
lasting efficiency of the edge pressure unit. - Roller movement in favour
of panel feeding:
for "shock-free" gluing of the edge on the
panel | |
The two idle rollers feature: - Independent adjustable pneumatic
pressure:
to obtain the correct pressure for each edge type and thickness. - Opposed
taper:
for perfect edge application along the glue line. - Roller
movement in favour of panel feeding:
for "shock-free" gluing
of the edge on the panel. |
| - Robust -
| |
| | Panel
feed system using 1-inch strong industrial chain. Large sized transport tracking,
with an industrial feed pad: 70 mm wide. | |
| | |
| | | Tubular
structures with extremely good bending and torsional strength for: basement, table
for working units and feed chain housing. |
| | | |
- Stability of
panels during processing - To ensure maximum stability
of panels during processing, especially small panels:-
|
| | Rubber
pressure wheels with large diameter (60 mm) mounted on bearing to accommodate
any small differences in the thickness of panels. |
| | | Two
rounded guides for the feed chain pads to ensure a perfect and lasting resistance
to side loads. |
| |
| Two
rows of staggered pressure wheels. |
|
- Complete range of standard
equipment -
- 2 adjustable air blowing systems to cool delicate
edging.
- Protection/copying plate in front of the glue
roller blocking.
- Safety device in case of a drop
in pneumatic pressure.
- Centralised dust extraction.
- EC safety regulations.
- Practical and fast setup - 
Quick release of working units for speedy replacement of cutters and fast work
changing.
| 
With radius cutters: 2 manually adjustable work positions, for quick changeover
from thin edge to edge with a thickness of 2-3mm.
|
Digital indicators on the main adjustments: panel thickness, edge thickness, top
and bottom edge trimmers, edge-scrapers.
|
Large infeed guide, to ensure safe loading of panels of all sizes.
| 
Adjustable rollers support for large panels, running the entire length of the
machine.
| 
Quick selection switch for pneumatic pressure of the shearing device: thin edge
- 2-3mm thick edge. Adjustments and controls on independent devices. |
|
- Ease of maintenance -
-
Compressed
air filtering and lubrification unit. -
Centralised pneumatic
air cleaning of the feed chain.
- Centralised
lubrication of the feed chain.
-
Possibility of fitting compressed air gun to clean the
machine.
-
End-trimmer unit shavings removal conveyor. |
TECNOMA
offers a wide range of models to satisfy all requirements
| Technical
Data | | |
XT10 | XT15 |
| Working height | 10
- 45mm | 10 - 45mm |
| Thickness of edging in rolls | 0.4
- 3mm | 0.4 - 3mm |
| Max. thickness of edging in strips | 10mm |
15mm | | Minimum panel width |
60mm | 60mm |
| Minimum panel length | 140/200mm |
140/200mm | | Panel feed
speed | 12m/min |
12m/min | | Exhaust hood
diameter | 80mm |
80mm | | End-cutting unit
motor power | 0.35Kw |
0.35Kw | | End-cutting unit
rotation speed | 12,000rpm |
12,000rpm | | Edge-trimming
unit motor power | 0.55Kw |
0.75 Kw | | Edge-trimming
rotation speed | 12,000rpm |
12,000rpm | | Buffing unit
motors power | 0.13Kw |
0.13Kw | | Buffing unit rotation
speed | 2,750rpm |
2,750rpm |
| Dimensions |
| | A
mm |
B
mm | C
mm | Height
mm |
Power rating
Kw | Net
Weight
Kg | | XT10.2 R |
3400 | 1200 |
400 | 1510 |
8.5 | 850 |
| XT10.3 RS | 3400 |
1200 | 400 |
1510 | 9 |
900 | | XT10.3 2R |
3900 | 1200 |
400 | 1510 |
11.5 | 950 |
| XT10.4 2RS | 3900 |
1200 | 400 |
1510 | 12 |
1000 | | XT10.4 RRS |
3900 | 1200 |
400 | 1510 |
9 | 1000 |
| XT10.5 2RRS |
3900 | 1200 |
400 | 1510 |
12 | 1060 |
| | | XT15.2
R | 3500 |
1200 | 400 |
1510 | 9 |
900 | | XT15.3 RS |
3500 | 1200 |
400 | 1510 |
9.5 | 950 |
| |
| Model |
ISO/DIS 7960(F)
Operator position - machine working
| | Work piece infeed |
Work piece outfeed | | XT10.5
2RRS |
77.4dB(A)
|
77.1dB(A) | | |
