Squalo 400s
DEMAK Squalo 400s
Reliability and Sturdiness
The Squalo 400s can be assembled with a special motorized roller, thanks
to this system, an automatic alignment of boards with a continuous sequenced entry
is guaranteed.
This binomial Alignment/Automatic sequence can
guarantee the total elimination of energy appearances with minor use of the blades.
This system of roller can guarantee the cutting of short pieces up to 27cm and
is unique of its kind. The machine is fitted with an 'automatic introducer', which
has a toothed roller above and underneath.
Power and Precision
The Squalo 400s's overcapacity is able to bear the heaviest working loads,
even for the most demanding user.
Using the blade holder shaft counter-support,
fixed by a special bearing, gets rid of all possible oscillations that the shaft
can have, with the result of a precise and planed cut.
Reduce
the wood scrap
Thanks to the counter support system and the absence of
vibration, the 60mm shaft can assemble very thin blades. (eg. Up to 40cm high
for a fir tree, with a blade thickness of 1.7mm)
High Production
All the mechanical attention allows the Squalo 400s to produce listells
of up to 4mm thickness, which provides authentic innovation in the sawmill industry.
Technical data Squalo 400s (Orca 600s)
| Width of carrier mat | 400mm
(600mm) |
| Maximum width circular grouped blades |
380mm (580mm) |
| Maximum
height of cut (without platter) | 150mm
(150mm) |
| Minimum working length (standard) |
700mm (700mm) |
Minimum
width of passage
(with protection case) | 750mm
(950mm) |
| Diameter sleeve holder shaft |
60mm (60mm) |
| Diameter
hole of circular blade | 80mm (80mm) |
| Diameter circular blades | 250-450mm
(250-450mm) |
| Speed of bladeholder shaft |
3,800 rpm (3,800 rpm) |
| Speed
of variable development | 0 - 34m/min
(3 - 34m/min) |
| Power motor of bladeholder
shaft | 40-50-60-75-100-125 HP
30-37-45-55-75-94
kW
(75 - 100 - 125 HP) |
| Power of motor
lifting bladeholder shaft | 0,33 HP - 0,25kW
(0,33 HP) |
| Power of motor lifting roll presser |
0,33 HP - 0,25kW
(0,33 HP) |
Power
of motor group development with motor variator reducer
|
3 HP (3 HP) |
| Net weight
ca. | 3,600 - 4,200 Kg
(5,000 - 6,000Kg) |
