New and Used Woodworking Machinery, UK - Conway Saw and Supply

Tooling / Spares
highlights

Rubber / Steel
Feed Rollers

Mortise Chisels
& Bits

DC Injection Braking for the Woodworking Industry

Robland E-3200 Panel saw

Both professional and craftsmen woodworkers require a strong well built and precise machine. A machine that's simple and easy to use and will give good reliable service for many years to come. Designed to improve a shop's production and accuracy, the Robland E-3200 is just such a machine. Custom crafted for fast-easy operation while performing high precision cuts, a machine which will stand the test of time.

Machine-frame - The frame is carefully designed to maximise strength and rigidity. It is made of 4mm steel plate in a so called box-construction. - The heavy cast iron saw table is bolted onto the frame as is the oversized aluminium sliding table, completing this very solid, yet compact unit. - The body of the machine is powder-coated.

Sliding table - The hard anodized sliding table is precision machined and features a 410mm wide table, and impressive 310mm wide lower beam. - The heart of the sliding table is 8 hardened rods inserted into the aluminium table extrusions. - These are 8mm diameter and set in a square pattern to guide the steel roller bearing balls. - This makes the whole system extremely wear-free and requiring almost no cleaning as the saw dust simply falls clear of these guides. - The steel sliding table guide rods can move freely within the aluminium extrusion, compensating for the different coefficients of expansion of the different metals. - In case of any use or damage to the steel rods, these rods can be turned inside the extrusions without having to dismantle the sliding table, or even worse, sending it back to the factory! - All parts of the sliding table are hard anodized. - The result of all this clever design is the very high quality of cut from the saw.
		Saw unit - Both tilt and rise and fall of the saw blade is done by hand wheel and thread bars guided directly in the cast iron nuts on the saw unit. - Both 45 degree and 90 degree stops are adjustable. - The main saw is equipped with a 3.7kW motor, the scoring saw unit is equipped with a 0.55kW motor, for both 400 volt or 230 volt three phase versions. - The machine can be equipped with single phase motors, the power is then 2.2kW, the scoring saw motor has 0.55kW. - As an option, the machine can be equipped with an 'Automatic Star-Delta' starter (only three phase version machine). - The scoring unit is driven by its own separate motor and allows the use of scoring saw blades of 120mm diameter, 20mm bore. - Scoring unit adjustments are easy to operate and are grouped together, the rise and fall of the main saw blade is done by hand wheel, the maximum cutting depth is 100mm (max. diameter saw blade is 300mm).

		Cross-cut fence - The machine is equipped with a sturdy, hard anodized fence, which telescopes out to 2500mm, and has 2 flip-over stops with magnifying lenses - no room for error on the settings as a result.

		Parallel fence - The hard anodized sturdy profile is mounted onto a heavy cast iron support block and can be equipped with the optional digital read-out with a precision of 0.1mm. - The cutting width is 1280mm.


		Mitre fence - The machine is equipped with a 2 x 60 degree mitre fence, and heavy duty wood clamp which allows the wood to be held down firmly.

Options

Automatic 'Star-Delta' starter for 3.7kW motor
Digital read-out parallel saw fence

Specifications	E-3200
Voltage	230v or 400v
Voltage single phase	230v
Motors single phase	3 HP
Motors three phase	5 HP
Motor scoring unit	0.75 HP
Maximum diameter main saw blade	300mm
Maximum diameter scoring saw blade	120mm
Maximum cutting depth at 90 degrees	100mm
Maximum cutting depth at 45 degrees	80mm
Tilt main and scoring saw blade	45 degrees to 90 degrees
Dimensions cutting table	410mm x 3200mm
Cutting width	1280mm
Speed main blade	4500rpm
Speed scoring saw blade	6500rpm
Lateral adjustment scoring saw	5mm
Dimensions saw table	940mm x 510mm
Dimensions table extension	720mm x 450mm
Dimensions cross-cut table	1060mm x 510mm
Weight	500kg
Weight sliding table packed	190kg
Dimensions machine crate	2270mm x 1330mm x 1000mm
Dimensions sliding table crate	3250mm x 450mm x 200mm
Diameter dust suction outlet	100mm
Diameter dust suction outlet saw guard	60mm

  Since 1954 Conway Saw and Supply UK have been supplying new and used woodworking machinery and associated equipment to the solid wood and panel processing industries. Centrally located in West Bromwich, UK, visitors are welcome to visit our purpose built factory with over 200 examples of new and used woodworking machinery.

  All our new and used woodworking machinery is supplied with a comprehensive warranty backed up by our own service engineers in addition to any manufacturers guarantee. Our comprehensive UK stock ranges from semi-professional universal woodworkers through to high production computer controlled routing and sawing machines and it is our aim to provide a solution whatever your machinery requirements. Important changes to the safety regulations which apply to all types of new and used woodworking machinery are now in place.

  Our 10,000 sq ft purpose built factory at West Bromwich is approximately 30 minutes from Birmingham International Airport and 2 miles from motorway network. Our modern factory is equipped with the latest handling equipment for new and used woodworking machinery.