Both professional and craftsmen woodworkers require a
strong well built and precise machine. A machine that's simple and easy
to use and will give good reliable service for many years to come. Designed
to improve a shop's production and accuracy, the Robland E-3200 is just
such a machine. Custom crafted for fast-easy operation while performing
high precision cuts, a machine which will stand the test of time.
Machine-frame
- The frame is carefully designed to maximise strength and rigidity.
It is made of 4mm steel plate in a so called box-construction.
- The heavy cast iron saw table is bolted onto the frame as is
the oversized aluminium sliding table, completing this very solid,
yet compact unit.
- The body of the machine is powder-coated. |
|
|
|
 |
Sliding table
- The hard anodized sliding table is precision machined and features
a 410mm wide table, and impressive 310mm wide lower beam.
- The heart of the sliding table is 8 hardened rods inserted into
the aluminium table extrusions.
- These are 8mm diameter and set in a square pattern to guide
the steel roller bearing balls.
- This makes the whole system extremely wear-free and requiring
almost no cleaning as the saw dust simply falls clear of these
guides.
- The steel sliding table guide rods can move freely within the
aluminium extrusion, compensating for the different coefficients
of expansion of the different metals.
- In case of any use or damage to the steel rods, these rods can
be turned inside the extrusions without having to dismantle the
sliding table, or even worse, sending it back to the factory!
- All parts of the sliding table are hard anodized.
- The result of all this clever design is the very high quality
of cut from the saw.
|
|
|
Saw unit
- Both tilt and rise and fall of the saw blade is done by hand
wheel and thread bars guided directly in the cast iron nuts on
the saw unit.
- Both 45 degree and 90 degree stops are adjustable.
- The main saw is equipped with a 3.7kW motor, the scoring saw
unit is equipped with a 0.55kW motor, for both 400 volt or 230
volt three phase versions.
- The machine can be equipped with single phase motors, the power
is then 2.2kW, the scoring saw motor has 0.55kW.
- As an option, the machine can be equipped with an 'Automatic
Star-Delta' starter (only three phase version machine).
- The scoring unit is driven by its own separate motor and allows
the use of scoring saw blades of 120mm diameter, 20mm bore.
- Scoring unit adjustments are easy to operate and are grouped
together, the rise and fall of the main saw blade is done by hand
wheel, the maximum cutting depth is 100mm (max. diameter saw blade
is 300mm). |
|
 |
|
Cross-cut fence
- The machine is equipped with a sturdy, hard anodized fence,
which telescopes out to 2500mm, and has 2 flip-over stops with
magnifying lenses - no room for error on the settings as a result. |
|
 |
|
Parallel fence
- The hard anodized sturdy profile is mounted onto a heavy
cast iron support block and can be equipped with the optional
digital read-out with a precision of 0.1mm.
- The cutting width is 1280mm.
|
 |
|
|
 |
|
Mitre fence
- The machine is equipped with a 2 x 60 degree mitre fence,
and heavy duty wood clamp which allows the wood to be held down
firmly. |
|
|
Specifications
|
E-3200
|
| Voltage |
230v or 400v
|
| Voltage single phase |
230v
|
| Motors single phase |
3 HP
|
| Motors three phase |
5 HP
|
| Motor scoring unit |
0.75 HP
|
| Maximum diameter main saw blade |
300mm
|
| Maximum diameter scoring saw blade |
120mm
|
| Maximum cutting depth at 90 degrees |
100mm
|
| Maximum cutting depth at 45 degrees |
80mm
|
| Tilt main and scoring saw blade |
45 degrees to
90 degrees
|
| Dimensions cutting table |
410mm x 3200mm
|
| Cutting width |
1280mm
|
| Speed main blade |
4500rpm
|
| Speed scoring saw blade |
6500rpm
|
| Lateral adjustment scoring saw |
5mm
|
| Dimensions saw table |
940mm x 510mm
|
| Dimensions table extension |
720mm x 450mm
|
| Dimensions cross-cut table |
1060mm x 510mm |
| Weight |
500kg
|
| Weight sliding table packed |
190kg
|
| Dimensions machine crate |
2270mm x 1330mm x 1000mm
|
| Dimensions sliding table crate |
3250mm x 450mm x 200mm
|
| Diameter dust suction outlet |
100mm
|
| Diameter dust suction outlet saw guard |
60mm
|
|
