180/4FM |
| Specification: |
|
Head sequence:- | First Bottom
Fence Side
Near Side
Top |
| Motor
powers:- | 1 x 7.5 kW (10hp) to horizontal heads
1 x 7.5 kW (10hp) to vertical heads |
| |
| Capacities: |
| Finished side capacity | 180 x 120mm |
| Minimum finished width | 23mm |
| Minimum finished thickness | 6mm |
| Spindle diameter | 40mm |
| Minimum length through-feed | 430mm |
| |
| Cutting
Circles: |
| Maximum cutting
circle | 137mm diameter |
| Minimum
cutting circle | 100mm diameter |
| Maximum cut on first bottom and fence side head | 10mm |
| Edge reference system to first bottom head,
for perfect edge straightening |
| |
| Feed System: |
| Shaft/chain
drive to feed-works |
| Spring loading
to feed rollers |
| Feed roll diameter | 120mm |
| |
| Electrical: |
| Feed motor 0.7 / 1.1 kW |
| 400v/3ph/50hz |
| Motor
start and stop buttons |
| Control
panel master stop |
| Lockable isolating
switch |
| No volt and overload protection |
| |
| Feed
selections: |
| 1.7 metre long
in-feed straightening table and fence |
| Feed
speeds | 6 & 12m/min |
| Spindle
speed | 6000 rpm |
| |
| Cutter equipment: |
| Set
of 3 knife cutter equipment comprising of: |
| Edge reference disc 140 x 10mm |
| Two 190mm x 120mm diameter three knife planing cutterblocks each
with three 3mm HSS knives |
| Two
130mm x 120mm diameter three knife planing cutterblocks each with three 3mm HSS
knives |
| |
| Included
with the machine: |
| Lift up
front safety cover electrically interlocked with timed control |
| Mechanical digital read-outs for width and thickness measuring
0.1mm |
| Idle side roller pressures
opposite fence side head, moving with near side head |
| Dust hoods (120 & 150mm outlet diameter) |
| Instruction and spare parts manual |
| |
| Includes: Internal light, bed lubrication,
300mm infeed table extension |
| |
to Planer Moulders
