Conway Saw - Throughfeed Heavy Duty Planer Moulder Mpower RMM-623

Features

Electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with LED measurement display.
Electronic positioning by keypad control and motorised adjustment to 2nd top spindle vertical movement with LED measurment display.
60mm high fences.
Vertical spindles have 30mm vertical adjustment.
Horizontal spindles have 20mm horizontal adjustment.
Receding chipbreaker assembly before first and second top heads with mechanical digital readout.
In-feed side pressure unit before first bottom head.
Side pressure unit opposite fence side heads moving with near side head.
Adjustable side guides after near side head.
Pad pressure after first and second top heads.
2350mm in-feed table with 10mm adjustment.
40mm diameter spindles belt driven, with spindle speed of 6000rpm.
All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting.
Independent manual vertical adjustment to top heads.
High precision spindle units with super high precision high speed bearings.
All bedplates and fences have hardened chrome.
Manual bed lubrication system.
Heavy duty main frame with optimum vibration absorption.
Centralised lubrication system to all main slides.
Safety interlock at in-feed to prevent feeding oversized material.
Lift up sound and safety enclosure including internal lighting with safety interlocks.
Timed interlock to lift up enclosure with safety feature to enable setting with enclosure open.
Dust hoods.
Toolkit.
Instruction and maintenance manual, electrical diagram and parts list.
Machine supplied with electrics arranged 3/50/390 v.
Machine conforms to CE specification.

Mpower RMM-623
Capacities:
Minimum/Maximun size of timber admitted width	20 - 230mm
Minimum/Maximum size of timber admitted thickness	8 - 160mm

Head Sequence & Motor Powers
First bottom	5.5kW / 7.5hp
Fence side	5.5kW / 7.5hp
Near side	5.5kW / 7.5hp
First top	7.5kW / 10hp
Second top	7.5kW / 10hp
Second bottom	7.5kW / 10hp
Note: All 10hp motors include star delta starters

Cutting Circles:
First bottom head	108mm 145mm maximum
Fence side heads	108mm 200mm maximum
Near side heads	108mm 200mm maximum
First top heads	108mm 200mm maximum
Second top heads	108mm 200mm maximum
Second bottom head	108mm 200mm maximum

Feed System:
Maintenance free full cardan shaft drive to feed works for balanced drive performance, with individual worm reduction gear box to each feed roller station.
Feed roller diameter	140mm
Infinitely variable feed speeds with electronic inverter and feed speed LED display: 6 - 30 metres per minute
Feed motor power	4kw / 5.5hp
Top in-feed rollers before first bottom head with pneumatic rise and fall by switch.
Steel feed rollers up to top head are hardened and chromed to resist wear and to minimise chip adhesion.
Polyurethane feed rollers after top head.
Two driven serrated in-feed bed rollers before first bottom head 1 x 30mm & 1 x 50mm.
One full width driven plain bed roller before second top head.
All bed rollers are cardan shaft driven.
Pneumatic pressures to feed roller loading with 3 no pressure regulator controls.
Powered rise and fall to feed beam with 1.1kW / 1.5hp motor.
All feed rollers and pressures move with top beam rise and fall, including safety switches at extreme points.
Inch forward and reverse to feed with duplicate control at top head position for fast and easy setting.