New and Used Woodworking Machinery, UK - Conway Saw and Supply

Table:
The precision planed table is mounted on 4 big columns to give stability, even under very heavy loads.
The 2 speed rise and fall of the table, driven by its own motor is standard on all machines, the passage of wood is 300mm!
For wet or damp timber adjustable rollers (1 or 2) can be provided. Please note that this option must be ordered with the initial order for the machine.

Planed table:
The cast iron table is precision planed for smooth sliding of the workpiece. Highest quality 'cold process machining' is used, which produces no stress, ensuring table surface stays absolutely flat throughout its life.

Standard equipment on the machine: digital read-out with precision 1/10mm.

Machine frame:
The so called 'boxframe' is carefully designed to maximise strength and rigidity and built of 6mm and 8mm steel plate thus resulting in an extremely sturdy and torsion resistant base.

Feeding of the wood:
Standard on all machines : heavy pushers on both in and outfeed side, 2 steel outfeed rollers, 120mm diameter 4 knife cutter-black.
The optional 'TERSA' cutter-block with 4 turnblades provides a major advantage of quick precision setting of knives.
Standard equipment on the machine : separate motor drive of feed rollers with variable speed from 5 to 22m/min.
Optional : the machine can be equipped with noeprene outfeed rollers.

Motor and transmissions:
The machine is equipped in the standard version with a 5,5kW motor. Optional motors of 7,5 and 11kW can be provided. Standard tension is 400 Volt, upon request the machine can be made in 230 Volt threephase.
The transmission of the cutter block is achieved by 3 V-belts, the transmission of the feeding rollers is achieved by double sprockets and chains with automatic tensioners. All different arbors and automatic chain tensioners have double bearings.

Thicknesser capacity:
Standard equipment on the D-630: 2-speed rise and fall of the table, digital read-out with precision 0,1mm, capacity 300mm!
Mounted via 4 big columns, the table offers great stability even when machining long, heavy timbers. For wet or damp timber, adjustable, retractable rollers (1 or 2) can be provided.
This option gives you the advantage when productivity comes before the the finish of the wood.
Please note that this option must be ordered with the initial order for the machine.

Technical Specifications Thicknesser D-630

Voltage	400/230V
Motor power	5,5kW Option: 7,5 & 11kW
Motor power up and down table	0,55kW
Motor power feeding	0,75kW
Weight	950kg
Total weight machine crated	1100kg
Dimensions machine crate LxWxH	1590x1340x1235mm
Diameter cutter block	120mm
Knives	4
Dimensions knives	630x25x3mm
Cutter block speed	5200RPM
Maximum chip removal single pass	8mm
Serrated infeed roller	1, Diameter 70mm
Outfeed rollers	2, Diameter 70mm
Sectional infeed roller	Option
Woodpushers on both in and outfeed	Standard
Wigo cutter block reversible knives	Option
Dimensions thicknesser table	630x1160mm
Thicknesser capacity	300mm
Variable feeding speed by frequenty variator	from 5 to 22m/min
Friction reduction rolls in the thicknesser table	Option,1 or 2
Digital read-out thicknesser table	Standard
Rise and fall thicknesser table 2 speeds slow/fast	Standard
Safety micro switch on hood	Standard
Dust suction outlet	160mm
Machine CE	Standard
3 V-belt main motor drive system	Standard
Planed thicknesser table, reduces friction	Standard
Double drive chains and sprockets	Standard
Double bearings on main cutter block, and in and outfeed rollers	Standard
Magnetic knife setter	Standard
Thicknesser table mounted on 4 big posts and trapezium thread-bars, rock solid	Standard
Thicknesser table extension, with automatic height drive system	Option
Automatic 'Star-Delta' starter for 5,5kW and 7,5kW motor.	Option

Dimensions

Robland Thicknesser D-630