|
| Tooling
/ Spares
highlights | Ring
Fence | | | | | Bandsaw
Guide | | | | | TCT
Saw Blades | | | | | Rubber
/ Steel
Feed Rollers | |
| | | Mortise
Chisels
& Bits | |
| | | DC
Injection Braking for the Woodworking Industry |
| |
|
Robland SD510
| 
Both
professional and industrial woodworkers require a strong, well-built precision
machine that's simple, easy to use and that will give good reliable service for
many years to come - The Robland SD510 Planer-Thicknesser-Mortiser.
 |
- Strong cast iron deeply-ribbed for stability, the precision planed tables
open together on powerful springs and are held open by a safety catch to prevent
accidental closure.
- Edging operation is facilitated by 1500mm long x 200mm
high anodized fence.
- Mounted on parallelogram type precision slides, both
tables are fully adjustable up and down.
- For wet or damp timber, adjustable
rollers can be provided, mounted in and easily removable from the thickness table.
This option must be ordered with the initial order for the machine.
The
heavy duty mortiser is equipped with steel guide axes and runs on 6 linear ball
bearings, guaranteed for smooth and easy operation under the heaviest loads, and
is absolutely maintenance free.
The chuck runs at 3000RPM and the in-and-out
stroke lever of the table can be put at the low position for the machining of
large workpieces, eg. doors. |
| 
| Standard equipment
-
4 speeds controlled by a selector switch controlling both
infeed and outfeed rollers. -
4 columns anchored
thicknesser table. -
C.E. bridge guard with quick
positioning mechanism is added for protection whilst surfacing. -
Magnetic knife setter for its 4 knife cutter-block.
 | The
optional digital read-out in 0.1mm can be ordered to replace the standard analogue
readout.
The rise and fall of the thicknesser table, driven by an easy-to-use
electric motor is standard on all machines. The analogue readout is standard on
all machines. |  | Standard
an all machines: heavy pushers on both in-and-outfeed side, and a 4knife cutterblock
planer arbor. Optional "Wigo" cutter-block with 4 turnblades provides
quick precision setting of knives. This option must be ordered with the initial
order for the machine. |  | The
thicknessing table is mounted on four columns to give stability. For wet or damp
timber, adjustable rollers can be provided, mounted in and easily removable from
the thickness table. This option must be ordered with the initial order for the
machine. | | |
Specifications
| Planer |
| Planer width | 510mm |
| Total length planer table | 2250mm |
| Spindle diameter | 100mm |
| Number of knives | 4 |
| Dimensions of knives | 510x30x3mm |
| RPM | 600RPM |
| Planer table height | 790mm |
| Length planer fence | 1100mm |
| Height planer fence | 150mm |
| Inclination planer fence | 90
- 45degree | | Max. planer capacity |
6mm | | Motor |
5,5kW | | Tables |
cast iron | | Thicknesser |
| Table size | 855x510mm |
| Max. thickness capacity | 250mm |
| Feed speed | 5-8-10-16m/min. |
| Diameter feeder rolls | 50mm |
| Electrical raise and fall thicknesser table |
75mm/min. | | Table |
cast iron | | Mortiser |
| Dimensions table | 600x300mm |
| Stroke: cross | 200mm |
| Stroke: in-out | 150mm |
| Stroke: up | 150mm |
| Capacity chuck | 0-16mm |
| RPM | 3000 |
| Total weight without mortiser | 900kg |
| Total weight with mortiser | 1000kg |
| Tables | cast iron |
| Steel bars and linear bearings |
| Packing dimensions:
SD-510(LxWxH)
SDB-510(LxWxH)
| 2300x1150x980mm |
| Standard Equipment |
| 4 feeding speeds(electrical) | | 5,5kW
motor | | Electrical rise and fall of the thicknesser
table | | Pressure bars between feeder rolls and arbur |
| Manual "star-delta" starting | | Magnetic
knife setting jig | | Options |
| Mortiser unit | | 7,5 kW motor |
| Automatic "star-delta" starting for 5,5 & 7,5
motor | | Digital read out thicknesser |
| Wigo planer arbor | | 2 Friction reduction
rolld in thicknesses table | | |
