Reignmac 4 Side Moulder RMM422 - RMM522U

Reignmac 4 Side Moulder RMM422 - RMM522U

Professional solution for small quantity process as simple soft wood strip and square boards

M22 Outstanding character

• Work table of 2300mm length has plated with hard chromd up to HV800 degree of hardness for the good durability
• Individual motor for each spindle to ensure maximum cutting power.
• .Double speed 8m/min & 16m/min for RMM422; Double speed 10m/min & 20m/min..
• The gear case is equipped , to be good for processing the short pieces
• Adopting the chain transmission to build up the feeding system, convenient for maintain.
• Height indicator has been set for the elevation of top spindle and feed beam.
• Manual oil pump lubricates the work table, it makes the feeding more smooth.
• Adpoting electric components from international class with steady quality
• Sealed safety cover is for the protection against noise and dust, and it is helpful for safe operation.
• Each spindle is started by the Y-? starter 11.Micro-adjustment on front and rear, lift and fall of bottom spindle
• Right spindle micro moves forward and backward
• Left spindle moves forward and backward
• Elevation movement on top spindle

Specification & type		RMM422	RMM522U
Working Width (mm)	Min.	20	20
	Max.	220	220
Working thickness(mm)	Min.	7	7
	Max	120	120
Number of Spindles		4	4+1
Spindle Speed(r/min)		6000	6000
Aluminium cutter size OD×length of cutter	Bottom Spindle	Ø125×230	Ø125×230
	Pre-trimming cutter	Ø145×12	Ø145×12
	Right Spindle	Ø125×130	Ø125×130
	Left Spindle	Ø125×130	Ø125×130
	Top Spindle	Ø125×230	Ø125×230
	universal spindle	Ø125×240	Ø125×240
Spindle diameter(mm)		Ø40	Ø40
Basic Motor powers  (kW)	Bottom Spindle	4 kW/5.5HP	4 kW/5.5HP
	Right Spindle	3kW/4HP	3kW/4HP
	Left Spindle	3 kW/4HP	3 kW/4HP
	Top Spindle	4kW/5.5HP	4kW/5.5HP
	universal spindle	~~~~~	4kW/5.5HP
	Double-speed feed	1.5kW /2HP &  2.2kW/3HP	1.5kW /2HP &  2.2kW/3HP
	Top spindle elevation	0.18kW/0.25HP	0.18kW/0.25HP
Feed speed		8m/min&16m/min	10m/min & 20m/min
Total motor power		16.38kW/22.25HP	20.38kw/27.75HP
Dust pipe diameter(mm)		Ø120	Ø120
Overall machine dimensions (L×W×H)     (mm)		3390×1100×1560	4243×1271×1610
Weight(tons approx) (T)		1.5	2

NOTE
      1. The cutter blocks should be aluminium material
      2. Any variation to the specification above mentioned will not be further notified since the product specification and design keeps on changing all the time.