Robland NX-310

The machines NX-310 and NLX-310 are compact combined woodworking centres providing the modern woodworker Robland quality, precision, liability and security. The frame is designed to maximise strength and rigidity and is built of 4mm steel plate, and holds the cast iron saw-spindle table (total weight of machine NLX-310 is 650 kgs).

The hard anodized aluminium extrusion of the sliding table is precision machined and features a 310mm wide sliding table, and impressive 140mm wide lower beam. The heart of the sliding table is 8 hardened steel rods, inserted into the aluminium, set in a square pattern to guide the steel roller balls.

This makes the whole system extremely wear-free, requiring almost no cleaning.

Standard cutting length is 1340mm, optional cutting length 1900mm.

Standard motor sizes are 3kW three phase, 2.2kW single phase, optional 4kW three phase.

Robland NLX-310

---

	When machining large panels, the table surface is determinating, with the NLX-310 you have a major advantage.
	The mitre fence and stop on the sliding table is equipped with an eccentric woodclamp. Exact angles can be set and secured.
	Standard spindle diameter is 30mm (option 50mm), the working length of the spindle shaft is 125mm, the up and down stroke is 140mm. The maximum tool diameter which can be lowered under the table surface is 180mm, the spindle is locked with a lever. The spindle protection and woodpushers assure optimal safety.
	The large, hard anodized, jointer fence makes edge planing easy. Thanks to its special support bracket, the fence sets at any angle without a gap between the fence and the table surface.
	Setting the height of the thicknessing table is easy and simple, the travel up/down is 230mm.
	The mortiser, easy and simple to detach, is operated by 2 detachable levers, and is equipped with a 2-jaws chuck 0/16mm.
	Very easy to operate, well dimensioned 310mm wide sliding table, 140mm wide lower beam. The result of all this clever design is the very high quality of cut from the saw.
	Cast iron power feed "fold away" support table, standard on the NLX-310.
	Option : "WIGO" cutter-block with 3 reversible knives, provides quick precise setting of the knives.
	Option : "GILCO" universal spindle cutter-block, takes all grindable profile knives, no need for tilting spindle anymore! For spindle diameters 30mm and 50mm, cutter-block diameters 145mm and 160mm, height 40mm and 50mm

---

Technical Data