For more than 25 years, Robland have been one of the world's most important woodworking machinery manufacturers. This experience is your guarantee of the quality of the Robland LX310 combination woodworker.

A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the LX310 into a small panel saw with 1290mm crosscut capacity.

A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. Change-over is achieved instantly via a selection switch on the control panel. There is an extension table on the spindle table of the LX310 and also a mounting table for a power feeder. This folds away when the feeder is not required.

The optional revolving base and the wheelset make using the machine even easier.

	The planer table fence can also be used with the saw as both saw and planer tables are at the same height. This increases rip cut capacity to a maximum of 6000mm.
	The sturdy fence can be set to mitre angles up to 45 degrees and is complete with a clear scale, eccentric woodclamp and flip-over stop.
	The sawguard raises, lowers and tilts with the blade. They both retract fully below the table simply by sliding the table insert out. All in seconds, with no tools required.
	The large cast iron table slides on two 30mm bars. These bars can be repositioned along the machine frame in seconds. This allows the table stroke to be ideally positioned to suit working with the saw or spindle.
	The long planer tables make straightening workpieces easy. Fine adjustment of the tables is also easy thanks to the large handscrews. The planer fence is very solid and tilts with positive stops at 45 and 90 degrees.
	Up to 230mm thicknessing capacity with precision setting and locking. The very sturdy central column and positive feed systems ensure excellent results.
	Large capacities and sturdy construction ensure maximum versatility. 80mm bearing seats, a 30mm diameter spindle, and 3 spindle rings (maximum diameter of 180mm) ensure professional results. A spring loaded locking device enables quick fitting of tooling while the hood guards ensure maximum safety under all conditions. For precise easy set up, the fence features micro adjustment.
	Circular slides ensure smooth, easy movement of the worktable. Large travel capacities handle a wide variety of work. The lever handles are removed in seconds. In fact, the entire mortising unit is very easy to remove. This avoids any obstruction of inconvenience when using the machine's other functions.

In the standard version, the machine is equipped with the smaller sliding table. In this version the maximum crosscut is 960mm. Optionally, a larger sliding table and longer bar system is available (without telescopic arm and table extension). This increases the crosscut capacity from 920mm to 1290mm. This machine is available with a planer/thicknesser width of 310mm(X310) and 260mm (X260). Apart from this table width difference, the same technical data apply on both the X310 and X260.