|


 | | |
|

 |
|
Mpower
Edgebander Type EB-5
Hot melt with glue pot
End trims
Top & bottom
trims (with or without radius)
Edge thickness: 0.4 - 2mm
Panel thickness:
12 - 40mm
Minimum panel length: 280mm
Minimum panel width: 90mm
Feed
speed: 6.5m/min
415v / 2.5kw
Weight: 400kg
New machine CE (ex-demo)
£5,750.00
|
|
 multiple
images and specifications | | |
|
 | | Virutex
Edgebander EB-35 CE (2007) for use with pre-glued edging up to 3mm 240v
/ 1-phase 
|
|

multiple images and specifications | |
Tecnoma Automatic Edgebander Type XT8 4RRS Hot
melt machine with glue pot 2001 CE 
|
|

multiple images and specifications | |
EBM Automatic Edgebander KDP 102 SLK(2006) CE
Hot melt machine with gluepot 2006 CE £4,750.00  |
|

multiple images | |
Hirzt Automatic Edgebander Type B200 for pre-glued
edges Guillotine to cut off the coil End trimmers Top & bottom
flush trimmers Track feed Electrical supply: 3-phase380/50/3
Total installed power: 3600 watts Blower motor power: 140 watts Panel
feed motor: 0.55kw Panel feed speed: 4 m/min Trimming motor power: 440w
Trimming rotation speed: 10,000rpm Panel thickness (Min/max): 10/40m Minimum
panel length: 140mm Minimum panel width: 70mm Tape thickness: 0.4 - 2mm
Weight: 400kg Dimensions: 2100 x 900 x 1300 (L x W x H) Year of manufacture
2005 CE £3,750.00  |
|
|
| |
Virutex EB25 Edgebander 2003 CE
1-phase Pre-gluded edging up to 0.6mm Cut-off coil, end trims, top/bottom
trimming |
|
|
| |
Brandt KD68 1995 CE Single Side Edgebander
Hotmelt Edge thickness 0.4 - 5mm Edges from coil 0.4 - 3mm
(0.4 x 55mm - 3 x 30mm) Workpeice thickness 10 - 55mm Min workpeice width
70mm Feedspeed 11 m/min Coil and strip magazine Hot melt unit
Pressure zone with 1 driven and 2 idle rollers End trims, straight and chamfer,
2 x 0.27 high frequency motors Top and bottom trimming, tilting, 2 x 0.4kw
high frequency motors Scraping unit Buffing unit Work peice transport
by chain, top pressure with rubber rollers Sound enclosure over all motors
Frequency changer £5,995.00  |
|
multiple images and specifications | |
Brandt Optimat KD 56 Edgebander CE (2000) £7,950.00
 |
|
multiple images | |
HolzHer 1417 1998 CE Pre-milling, end trims,
top & bottom triming, pneumatic scrapers, corner rounding, buffing. Cartridge
glue system  |
|
 | |
Virutex EB15 pre-glued 1-phase £1,950.00  |
|