Robland LX310-X260-X310

Robland LX310-X260-X310

Call For Price

A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the LX310 into a small panel saw with 1290mm crosscut capacity.

SKU: Robland LX310-X260-X310 Category: Manufacturer:

Description

For more than 25 years, Robland have been one of the world’s most important woodworking machinery manufacturers. This experience is your guarantee of the quality of the Robland LX310 combination woodworker.

A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the LX310 into a small panel saw with 1290mm crosscut capacity.

A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. Change-over is achieved instantly via a selection switch on the control panel. There is an extension table on the spindle table of the LX310 and also a mounting table for a power feeder. This folds away when the feeder is not required.

The optional revolving base and the wheelset make using the machine even easier.

The planer table fence can also be used with the saw as both saw and planer tables are at the same height. This increases rip cut capacity to a maximum of 6000mm.

The sturdy fence can be set to mitre angles up to 45 degrees and is complete with a clear scale, eccentric woodclamp and flip-over stop.

The sawguard raises, lowers and tilts with the blade. They both retract fully below the table simply by sliding the table insert out. All in seconds, with no tools required.

The large cast iron table slides on two 30mm bars. These bars can be repositioned along the machine frame in seconds. This allows the table stroke to be ideally positioned to suit working with the saw or spindle.

The long planer tables make straightening workpieces easy. Fine adjustment of the tables is also easy thanks to the large handscrews. The planer fence is very solid and tilts with positive stops at 45 and 90 degrees.

Up to 230mm thicknessing capacity with precision setting and locking. The very sturdy central column and positive feed systems ensure excellent results.

Large capacities and sturdy construction ensure maximum versatility. 80mm bearing seats, a 30mm diameter spindle, and 3 spindle rings (maximum diameter of 180mm) ensure professional results. A spring loaded locking device enables quick fitting of tooling while the hood guards ensure maximum safety under all conditions. For precise easy set up, the fence features micro adjustment.

Circular slides ensure smooth, easy movement of the worktable. Large travel capacities handle a wide variety of work. The lever handles are removed in seconds. In fact, the entire mortising unit is very easy to remove. This avoids any obstruction of inconvenience when using the machine’s other functions.

In the standard version, the machine is equipped with the smaller sliding table. In this version the maximum crosscut is 960mm. Optionally, a larger sliding table and longer bar system is available (without telescopic arm and table extension). This increases the crosscut capacity from 920mm to 1290mm. This machine is available with a planer/thicknesser width of 310mm(X310) and 260mm (X260). Apart from this table width difference, the same technical data apply on both the X310 and X260.

 

Technical (L) X310 X260
Planer
Voltage 220-380-single V 220-380-single V
Motors 3 phase 3×3 or 4 HP 3×3 or 4 HP
Motors 1 phase 3×3 HP 3×3 HP
Table Sizes 310x1400mm 260x1400mm
Max. thickness capacity 230mm 230mm
Feed speed 6 6
RPM 4500 4500
Knives 3 3
Saw
RPM 4000 4000
Max. depth of cut at 90 deg. 85mm 85mm
Max. depth of cut at 45 deg. 55mm 55mm
Saw table size 800x445mm 800x445mm
Saw diameter 250x30mm 250x30mm
Saw stroke LX310 1290mm
Saw stroke X310,X260 960mm 960mm
Spindle
RPM 3 phase 3000/6000 3000/6000
RPM 1 phase 6000 6000
Spindle diameter 30mm 30mm
Spindle capacity 125mm 125mm
Rise and fall 140mm 140mm
Sliding table size 340x370mm 340x370mm
Mortiser
RPM 4500 4500
Table size 200x425mm 200x425mm
Stroke:cross in/out/up 165x140x85mm 165x140x85mm
Chuck capacity 0-16mm 0-16mm

 

Conway Saw are one of the UK’s leading woodworking machinery specialists offering a range of new and used wood cutting machines. We sell a variety of machines including up cut saws, bandsaws, radial arm saws, spindle moulders and edgebanders. We also sell a number of woodworking consumables including head return springs, glue applicators, Wadkin spares and other tooling such as rubber feed rollers, sash cramps and mortising tools.

Call 0121 553 5461